VW Oil - 5W-40 Weight - Motor Oil Spec VW 502 00 , 505 00 , 505 01 - German Ravenol VMO - 5L
5 Liter Bottle - 5W-40 synthetic motor oil meets specifications Audi VW 502 00, 505 00, VW 505 01, BMW Longlife-04, Mercedes-Benz MB 229.31, MB 229.51 specs, and GM Dexos 2. Meets API SN, CF, ACEA C3 oil standards. Also used in Porsche, Ford, Fiat, Chrysler and other applications. See your owner service manual to confirm.
Fabrication: Synthetic, Mid Saps & CleanSynto®
RAVENOL VMO SAE 5W-40 is a synthetic Mid SAPS low friction motor oil with CleanSynto® technology for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.
RAVENOL VMO SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
RAVENOL VMO SAE 5W-40 extends long life of DPF and TWC. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL VMO SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Because of a considerable fuel saving RAVENOL VMO SAE 5W-40 contributes to protect the environment by reducing the emissions.
Suitable for extended oil change intervals where recommended by manufacturer.
RAVENOL VMO SAE 5W-40 is an universal, synthetic low friction motor oil especially developed for PumpeDüse-diesel engines. Moreover, this lubricant is excellent suitable for gasoline and diesel engines in passenger cars and vans with and without turbo charger. Due to the specific composition is RAVENOL VMO SAE 5W-40 excellent suitable for use for several OEM requirements.
RAVENOL VMO SAE 5W-40 is approved, tried and tested for aggregates specifying:
Specifications: API SN/CF, ACEA C3
License: API SN
Approvals: BMW Longlife-04; GM dexos™ (Lizenz-Nr. D20583HI081); MB-Freigabe 229.31, MB-Freigabe 229.51; VW 505 00 / 505 01
Recommendations: Chrysler MS-11106; Fiat 9.55535-S2, Fiat 9.55535-GH2; Ford WSS-M2C917-A; Porsche A40; VW 502 00
RAVENOL VMO 5W-40 offers:
- Fuel economy in part and full power operation
- MID SAPS = reduced Sulphated Ash, Phosphorous and Sulphur
- Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine
- Excellent cold starting characteristics also at low temperatures below -30°C
- The function of the hydro tappet is ensure at all temperatures
- A safe lubricant film at high operating temperatures
- Low evaporative tendency, so lower oil consumption
- No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned
- Neutrality towards sealing materials
- Extended oil change intervals to protect natural resources
To the best of our knowledge all information reflects the current state of findings and our development. Subject to change. Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems occur please consult a technician.
Always consult your service manual and confirm the specific fluid and oil requirements for your application. Blauparts and Ravenol are not affiliated with Volkswagen of America (VwoA), Volkswagen AG, Audi of America, Audi AG or any other vehicle manufacture. All trademarks and OE specification part numbers referenced in this product listing are displayed for identification purposes only and are in no way intended to denote any affiliation with their corresponding owners.
WARNING: California Proposition 65
|Item Returns||This item can be returned|