Ravenol Motor Oil DFE 0W-20 Fully Synthetic 5L

Fabrication: Fully Synthetic, USVO® & CleanSynto®

RAVENOL DFE SAE 0W-20 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection.

Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient.

RAVENOL DFE SAE 0W-20 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency.

RAVENOL DFE SAE 0W-20 ensures the prevention of premature fuel ignition LSPI (Low Speed Preignition), thus avoiding engine damage. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase. By significantly reducing fuel consumption, RAVENOL DFE SAE 0W-20 helps to protect the environment by reducing emissions.

RAVENOL DFE SAE 0W-20 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

Extended oil change intervals according to the manufacturer 's instructions.

Application Directions:

RAVENOL DFE SAE 0W-20 is suitable as a high-performance light-running engine oil for demanding engines. It is recommended for modern passenger car engines from OPEL, GENERAL MOTORS, Chevrolet according to GM dexos1™ Gen 2 specification under all operating conditions. RAVENOL DFE SAE 0W-20 is also applicable to the specified specifications of Ford and Chrysler.

Quality Classification:

RAVENOL DFE SAE 0W-20 is approved, tried, and tested for aggregates specifying:
Specifications: API SN Plus, API SP (RC), ILSAC GF-6A
Approvals: API SN Plus, API SP Resource Conserving, GM dexos1™ Gen 2 (Lizenz-Nr. D10689HJ081), ILSAC GF-6A
Recommendations: Chrysler MS-13340, Chrysler MS-6395, Ford WSS-M2C947-A, Ford WSS-M2C947-B1
Follow the manufacturer's recommendations.

Technical Characteristics:

RAVENOL DFE SAE 0W-20 offers:

• Fuel savings in partial and full load operation
• LowSAPS = Low sulfate ash, phosphorus, and sulfur
• Very stable and excellent viscosity behavior
• Excellent shear stability
• Very good cold start characteristics
• A safe lubrication film at very high operating temperatures
• Very good detergents and dispersing properties
• Very good wear and corrosion protection
• Protection from foam formation
• Excellent detergent and dispersant properties
• Long life due to high oxidation stability
• Catalyst suitability

To the best of our knowledge all information reflects the current state of findings and our development. Subject to change. Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems occur please consult a technician.
19.03.19

Always consult your service manual and confirm the specific fluid and oil requirements for your application. Blauparts and Ravenol are not affiliated with Volkswagen of America (VwoA), Volkswagen AG, Audi of America, Audi AG or any other vehicle manufacture. All trademarks and OE specification part numbers referenced in this product listing are displayed for identification purposes only and are in no way intended to denote any affiliation with their corresponding owners.

 WARNING: California Proposition 65