Share
Login to earn Reward Points for sharing!

Ravenol Brake Fluid DOT 4 LV - 1L

Rating:
100% of 100
$13.95
In stock
SKU
J3A1014-001-000

1 Liter Bottle - German made DOT 4 brake fluid. Designed for Volkswagen VW 501 14 and FORD WSS-M6C65-A2 brake fluid specifications. Low Viscosity DOT 4 LV Brake Fluid can also be used in Porsche, Mercedes-Benz and other car manufacturers requiring brake fluid specifications ISO 4925 Class 6, FMVSS 116 DOT 3, FMVSS 116 DOT 4, SAE J1703 and SAE J 1704 and ISO 4925 (Class 3 and 4) specs. Equivalent replacement for brake fluid part numbers B000750M1, B000750M2, B000750M3, B000750M6, B000750NP, PM-20, PM20, MB 331.0, 000989080701, 000989080710, 000989080711, 000989080713, 000989080715, 000989080717, 000989080718. See your owner service manual to confirm.

Fabrication: Synthetic Brake Fluid

RAVENOL DOT 4 LV is a very high specification Brake and Clutch Fluid which conforms to and exceeds the latest ISO 4925 Class 6 standard. The specific formulation of RAVENOL DOT 4 LV meets current international specifications US FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704 and ISO 4925 (Classes 3 & 4). With its exceptional viscosity performance even at extremely low viscosity (max. 750 cSt @ -40°C) RAVENOL DOT 4 LV is especially recommended for use in the hydraulic brake and clutch systems of vehicles fitted with ESP / ASR (Electronic Stability Program) systems.

The safety potential of the aggregates is enhanced by the excellent properties of RAVENOL DOT 4 LV even at low temperatures.

RAVENOL DOT 4 LV mixes safely with other brake and clutch fluids that meet the above specifications.

Application Directions:

RAVENOL DOT 4 LV brake fluid can be used in all vehicles where ISO 4925 Class 6 specification is required. RAVENOL DOT 4 LV is recommended for use in the hydraulic brake and clutch systems of vehicles fitted with ESP / ASR (Electronic Stability Program) systems.

RAVENOL DOT 4 LV is also recommended for use in the hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles for which a non-petroleum based fluid of this type is specified. RAVENOL DOT 4 LV brake fluid is miscible with all known brake fluids of the same specification.

To use the high performance level of RAVENOL DOT 4 LV, a complete change of the brake fluid is recommended.

RAVENOL DOT 4 LV is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).

FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID

KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.

STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER.

KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER.

CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.

Dispose of used brake fluid responsibly (EU waste code 160113)

Brake fluid damages paint work. If spilt wash off immediately with plenty of water.

Quality Classification:

RAVENOL DOT 4 LV is tried and tested for aggregates specifying:
Specifications: ISO 4925 Class 6, FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704 and ISO 4925 (Class 3 and 4)
Recommendations: Ford WSS-M6C65-A2, VW 501 14

Technical Characteristics:

RAVENOL DOT 4 LV offers:

  • Optimal ABS properties.
  • Chemical stability.
  • High lubricating power.
  • Neutral behavior towards brake parts.
  • Low viscosity at LVs.
  • Miscibility with all brake fluids of the same specification.

To the best of our knowledge all information reflects the current state of findings and our development. Subject to change. Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems occur please consult a technician.
09.08.19

Always consult your service manual and confirm the specific fluid and oil requirements for your application. Blauparts and Ravenol are not affiliated with Volkswagen of America (VwoA), Volkswagen AG, Audi of America, Audi AG or any other vehicle manufacture. All trademarks and OE specification part numbers referenced in this product listing are displayed for identification purposes only and are in no way intended to denote any affiliation with their corresponding owners.

 WARNING: California Proposition 65

All Models Requiring Low Viscosity Brake Fluid Part Number or Specification - ISO 4925 Class 6, FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704, ISO 4925 (Class 3 and 4)
Audi Models Requiring Low Viscosity Brake Fluid Part Number or Specification - VW 501 14, TL 766-Z, B000750M1, B000750M2, B000750M3, B000750M6, B000750NP, B 000 750 M1, B 000 750 M2, B 000 750 M3, B 000 750 M6, B 000 750 NP, B-000-750-M1, B-000-750-M2, B-000-750-M3, B-000-750-M6, B-000-750-NP
Ford Models Requiring Low Viscosity Brake Fluid Part Number or Specification - WSS-M6C65-A2, PM-20, PM20, ISO4925 Class 6
Mercedes-Benz Models Requiring Low Viscosity Brake Fluid Part Number or Specification - MB 331.0, 000989080701, 000989080710, 000989080711, 000989080713, 000989080715, 000989080717, 000989080718
VW Models Requiring Low Viscosity Brake Fluid Part Number or Specification - VW 501 14, TL 766-Z, B000750M1, B000750M2, B000750M3, B000750M6, B000750NP, B 000 750 M1, B 000 750 M2, B 000 750 M3, B 000 750 M6, B 000 750 NP, B-000-750-M1, B-000-750-M2, B-000-750-M3, B-000-750-M6, B-000-750-NP
More Information
BrandRAVENOL
MFG Part Numbers1350605-001-01-000
OE Part NumbersB000750M1, B000750M2, B000750M3, B000750M6, B000750NP, PM-20, PM20, MB 331.0, 000989080701, 000989080710, 000989080711, 000989080713, 000989080715, 000989080717, 000989080718
Item ReturnsThis item can be returned
Write Your Own Review
You're reviewing:Ravenol Brake Fluid DOT 4 LV - 1L
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions