Jaguar Motor Oil Types

In the mid 1990's Jaguar began using their own internal engine oil quality specification system. The engine oil quality specifications and standards were put in place to ensure that a higher quality level of engine oil would be used rather than broader and more general API or ACEA oil quality specifications. The new specifications and standards ensure optimal engine reliability and longevity. There are currently 6 different engine oil quality specifications that have been established for Jaguar engines since the mid 1990’s. Each Jaguar oil quality specification denoted by letters and numbers, signifies the necessary oil chemical properties and performance level required for specific Jaguar engine applications. Jaguar engines that experience mechanical issues or failures can be attributed to the prolonged use of low to mid quality engine oils that are not in accordance with the Jaguar engine oil quality standards. Using the correct Jaguar oil specification as suggested by Jaguar for your engine type will offer the best possible engine performance, protection, and longevity. Below you will find a brief overview and explanation of the Jaguar engine oil specifications along with the basic engine application they coincide with.

How to confirm which Jaguar oil specification is right for your engine?

Always consult your service manual and confirm the exact specific fluid and oil requirements for your specific Jaguar engine application. The recommended Jaguar oil, specifications, quality standards, and oil viscosity weight are specified in your owner's manual. These specifications can typically be referenced in the owner's manual index under engine oil or operating fluids. If you have lost your owner's manual and are having difficulty determining what type of Jaguar oil to use, you may wish to refer to our BLAU® Oil Change Kits for your Jaguar model. Our oil change kits conveniently include the correct Jaguar oil type, amount of oil, oil filter, and hardware for each specific model and engine type.

PAGE DISCLAIMER: The Jaguar motor oil information on this page should not be used as a substitute for what your vehicle owner's manual, factory service manual, or authorized Jaguar dealer recommends. Consult your owner's manual for the correct type of Jaguar oil that is to be used for your specific Jaguar model. The Jaguar oil specifications referenced in the article are used internationally. However, the Jaguar engine and year applications referenced apply only to Jaguar models available in the USA.

Recommended Jaguar Oil Specifications

Recommended Jaguar Oil Specifications

Jaguar STJLR.03.5003 Oil Spec

The Jaguar STJLR.03.5003 was Jaguars first oil quality specification released for USA models. This oil specification was primarily used and developed for select gasoline and diesel engines without diesel particulate filter systems. In the USA Jaguar recommended this oil quality specification for the 4.2L and 4.4L V8 gasoline engines up to 2009. 3.2 liter V6 gasoline engines up to 2012, and the 2.0 liter turbocharged gasoline engines up to 2017. The Jaguar STJLR.03.5003 specification will always require a Full SAPS or Full Ash (Full Sulphated Ash Phosphorus Sulfur) additive level formulation, suitable for extended oil change intervals, and should have a minimum high temperature high shear viscosity HTHS of 2.9 to 3.5 mPa*s. The Jaguar STJLR.03.5005 oil specification will always correspond to an ACEA A5/B5 specification and SAE 5W-30 viscosity. Also, the original Jaguar STJLR.03.5003 oil specification may have referenced the ACEA A1/B1 specification. This is now obsolete and has been updated and replaced by ACEA A5/B5.

RAVENOL FO 5W-30
Meets Jaguar STJLR.03.5003 Oil Specification

  • Modern high performance low friction synthetic with exclusive CleanCynto technology.
  • Suitable for extended oil change intervals when recommended by manufacturer.
  • Excellent sludge, detergents, and dispersant cleanliness.
  • Excellent cold start characteristics and shear stability with reduces internal dynamic engine drag and increased fuel mileage.

RAVENOL FDS 5W-30
OEM Approved Jaguar STJLR.03.5003 Oil Specification

  • Fully synthetic PAO based oil and exclusive USVO and CleanCynto technology.
  • No shear losses during an entire change interval.
  • Suitable for extended oil change intervals when recommended by manufacturer.
  • Minimizes friction, wear, improved fuel economy, and excellent cold start characteristics.
  • Utilizes the positive properties of tungsten to smooth the internal surface structure of the engine.

Jaguar STJLR.03.5004 Oil Spec

Oil specification STJLR.03.5004 was introduced in the USA around 2010. The Jaguar STJLR.03.5004 oil specification was the first oil quality standard used in the 5.0L V8 and 3.0L V6 Jaguar gasoline engines up to 2014. Jaguar STJLR.03.5004 will typically always recommend a Full SAPS or Full Ash additive (Full Sulphated Ash Phosphorus Sulfur) level formulation suitable for extended oil change intervals and should have a minimum high temperature high shear viscosity of HTHS of 2.9 - 3.5 mPa*s. The Jaguar STJLR.03.5004 oil specification will always correlate to a SAE 5W-20 viscosity. It also originally corresponded to the ACEA A1/B1 specification. However, around 2016 the ACEA A1/B1 specification has been removed or no longer referenced by ACEA. All ACEA A1/B1 oil formulations should be updated to correlate with ACEA A5/B5 quality standards.

RAVENOL SFE 5W-20
OEM Approved Jaguar STJLR.03.5004 Oil Specification

  • Fully synthetic PAO based oil and exclusive USVO and CleanCynto technology.
  • No shear losses during an entire change interval.
  • Suitable for extended oil change intervals when recommended by manufacturer.
  • Extremely stable to oxidation, minimizes friction, wear, improved fuel economy, and excellent cold start characteristics.
  • Utilizes the positive properties of tungsten to smooth the internal surface structure of the engine.

Jaguar STJLR.03.5005 Oil Spec

Jaguar STJLR.03.5005 oil specification was primarily developed for use with mid-size displacement Jaguar diesel engines equipped with diesel particulate filter emission after treatment systems. Currently in the USA the Jaguar STJLR.03.5005 oil specification is only used in the Jaguar models equipped with the 3.0L V6 diesel engine. Jaguar STJLR.03.5005 will typically always require a Low SAPS (Low Sulphated Ash Phosphorus Sulfur) additive level formulation to extend the life of modern engine emission systems, lower oil viscosity, extended oil change intervals, and should have a minimum high temperature high shear viscosity HTHS of 2.9 mPa*s. The Jaguar STJLR.03.5005 oil specification will always correspond to an ACEA C1 specification and SAE 5W-30 viscosity.

RAVENOL FLJ 5W-30
OEM Approved Jaguar STJLR.03.5005 Oil Specification

  • Performance low friction synthetic with CleanCynto technology.
  • Suitable for extended oil change intervals when recommended by manufacturer.
  • Supports longer diesel EGR, and DPF emission system cleanliness and longevity.
  • Extremely stable to oxidation, minimizes friction, wear, improved fuel economy, and excellent cold start characteristics.

Jaguar STJLR.03.5006 Oil Spec

The Jaguar STJLR.03.5006 oil quality specification started being used in the USA by Jaguar in 2018. Currently the Jaguar STJLR.03.5006 oil specification is being specified for use in the 2018 onward Jaguar 5.0L V8 and 3.0L V6 gasoline engines. It is also specified for use in the 2018 onward Jaguar 2.0 liter turbocharged gasoline engines. This oil quality specification will correlate to an ACEA C5 oil specification with a SAE 0W-20 viscosity. Jaguar STJLR.03.5006 is a Mid SAPS (Mid Sulphated Ash Phosphorus Sulfur) additive level formulation with lower viscosity and is suitable for extended oil change intervals. This oil specification also focuses on improved fuel economy and should have a minimum HTHS viscosity of 2.6 mPa*s. If you are challenged in finding an oil that meets the approved Jaguar STJLR.03.5006 specification in your region, you can choose to substitute the use of STJLR.03.5006 with the STJLR.51.5122 oil spec.

Jaguar STJLR.03.5007 Oil Spec

The Jaguar STJLR.03.5007 oil quality specification was primarily used and developed for smaller displacement Jaguar diesel engines equipped diesel particulate filter systems. Also known as diesel engine emission or exhaust after treatment systems. Currently in America the Jaguar STJLR.03.5007 oil specification is only used in the Jaguar models equipped with the 2.0 liter diesel engine. The Jaguar STJLR.03.5007 oil spec will typically always be based on a Mid SAPS (Mid Sulphated Ash Phosphorus Sulfur) additive level formulation, a lower viscosity oil grade, suitable for extended oil change intervals, and should have a minimum HTHS viscosity of 2.9 mPa*s. The Jaguar STJLR.03.5007 oil specification will also always correspond to an ACEA C2 specification and SAE 0W-30 viscosity.

RAVENOL FES 0W-30
Meets JaguarSTJLR.03.5007 Oil Specification

  • Fully synthetic PAO based oil and exclusive USVO and CleanCynto technology.
  • No shear losses during an entire change interval and utilizes the positive properties of tungsten to smooth the internal surface structure of the engine.
  • Supports longer diesel EGR, and DPF emission system cleanliness and longevity.
  • Extremely stable to oxidation, minimizes friction, wear, improved fuel economy, and excellent cold start characteristics.

Jaguar STJLR.51.5122 Oil Spec

The Jaguar STJLR.51.5122 oil quality specification started being used in the USA by Jaguar in 2015. Currently the Jaguar STJLR.51.5122 oil specification is being used in the 2015 onward Jaguar 5.0L V8 and 3.0 Liter V6 gasoline engines. This oil quality specification correlates to the ACEA C5 oil specification and is a SAE 0W-20 viscosity. The 5W-20 viscosity is also in accordance with the Jaguar STJLR.51.5122 specification. However, the SAE 5W-20 viscosity can be difficult if not impossible to find. The availability of this oil will depend on your region. Jaguar STJLR.51.5122 is a lower viscosity oil grade with a Mid SAPS (Mid Sulphated Ash Phosphorus Sulfur) additive level formulation. It is engineered for improved fuel economy and extended oil change intervals. Any oil claiming to meet Jaguar STJLR.51.5122 should have a minimum HTHS viscosity of 2.6 mPa*s.

RAVENOL ECS 0W-20
OEM Approved Jaguar STJLR.51.5122 Oil Specification

  • Fully synthetic PAO based oil and exclusive USVO and CleanCynto technology.
  • No shear losses during an entire change interval, stable to oxidation, minimizes wear, improves fuel economy, and excellent cold start characteristics.
  • Suitable for extended oil change intervals when recommended by manufacturer.
  • Utilizes the positive properties of tungsten to smooth the internal surface structure of the engine.

BLAU® Oil Change Kits for Jaguar Models

Our BLAU oil change kits are the perfect choice for today's discriminating vehicle owners who desire only the highest quality products. Our kits are great for individuals who are serious about improving engine performance, efficiency, and longevity. Everything you need in one convenient kit for changing your engine oil. Leave the guesswork out of your next oil change. Our all-inclusive kits include the following:

Jaguar Oil Change Kit Example

  • Formal OEM approved engine oils that typically exceed or meet your vehicle manufacturers specific oil requirements.
  • Premium RAVENOL oils with advanced USVO and CleanSynto technology.
  • The correct amount of oil for your engine application and oil capacity.
  • OEM or better oil filter (Cartridge style filters include filter housing seals)*.
  • Drain plugs or drain plug sealing washer hardware*.

*see our online catalog product images showing what is exactly included in our kits.

Note: Keep in mind that some instant oil change service shops and even some reputable automotive shops may not be using the correct oil specification for your engine application. Commonly, a generic lower quality engine oil is used for all their oil changes. These oils are often not OEM approved or don’t meet the specified motor oil quality specification levels required for your specific engine application.

SHOP BLAU® OIL CHANGE KITS

Jaguar Engine Oil Specification Types

Why choose RAVENOL engine oils for your Jaguar?Ravenol Jaguar Engine Oil Options

  • Better HTHS, Noak, and TBN performance levels.
  • Better cold temperature pour and high heat flash points.
  • OEM approved quality levels confirmed directly by Jaguar.
  • Advanced USVO and CleanSynto technology.
  • Engineered with improved lubricating properties.
  • Longer oil change intervals and extended service life.
  • Better engine wear protection and improved fuel economy.
  • 100% engineered, made, and bottled in Germany!

About USVO® Technology

Proven German engineered CleanSynto® technology now with added USVO® technology. USVO® technology is ultra-strong viscosity oil based on fully synthetic PAO (Poly-alpha-olefin) and or Ester base oils. USVO® technology provides an extreme high viscosity stability and avoids the disadvantages of using added polymeric viscosity improvers. This allows for an exceptionally higher level of engine protection, performance, engine cleanliness and longer oil drain intervals. This exclusive technology allows the oil to have no shear losses during the entire oil change interval while being extremely stable to oxidation. This technology also helps the oil to flow and lubricate faster, minimize friction, supports improved fuel economy, and keeps the engine clean and efficient. Some USVO® technology engine oils also utilize the positive properties of molybdenum and tungsten to smooth the internal surface structure of the engine, reducing friction and wear, and significantly improving mechanical efficiency. All of this provides cutting-edge engine protection, performance, and cleanliness.

Simply put Ravenol USVO® technology oils are setting a new standard in synthetic oil technology! Compared to others, they are using superior fully synthetic engine oil formulations. Minuscule breakdown or loss in viscosity during an entire extended oil change interval. If you’re looking for some of the best engine oils available, the USVO® products are your best option.

About CleanSynto® Technology

CleanSynto® technology reduces the deposit of soot and dirt particles so that oil can reach critical lubricating points more effectively, keeping your engine clean longer. This can dramatically improve engine efficiency and significantly reduce the risk of engine problems and damage in the future. With conventional oils and even many synthetics use inferior refined base oils and conventional additives. This type of standard formulation is sufficient for some applications but provides less long term protection. Soot and dirt particles can leave deposits or sludge, which may result in blocked crankcase hoses, filters, pumps, etc. Engine efficiency and life span then begins to decline.

Ravenol is revolutionizing motor oil with CleanSynto® technology! Superior quality synthetic base stocks and advanced German engineered additive packages outperform other brands and provides maximum lubrication during extended mileage oil change intervals. CleanSynto® technology improves engine cleanliness thus maximizing the engine's life span.


Disclaimer: Always consult your service manual and confirm the specific fluid and oil requirements for your application. Always follow the vehicle manufacturers recommended oil change intervals. Blauparts and Ravenol are not affiliated with Jaguar Land Rover Automotive PLC or Jaguar Land Rover Limited, its affiliated companies, subsidiaries, licensors, or any other vehicle manufacturer. All trademarks and OE specification part numbers referenced in this product listing or article are displayed for identification purposes only and are in no way intended to denote any affiliation with their corresponding owners.

This article was produced and written by the BLAU Technical Team - Blauparts LLC Copyright © 2021-Onward - All Rights Reserved