
This article will highlight the proper rear shock assembly stacking order for the BMW 3 series E46 platform. We will also highlight the correct concave shock mount washer placement. Always note the stacking order of all shock components during disassembly. This will allow proper noted assembly of the shock, washers, bump stop, shock mount, gasket, and nut.
Application: 1998-2006 BMW 3 Series E46 Chassis
Part Number: 33 52 1 092 362, MGR1501, MG21951, MG26011
1. During shock and shock mount replacement always reuse the concave washer plates under the shock mount and on top of the shock mount in the proper orientation as pictured.
2. If no concave washers are used during shock assembly, this could cause the shock to push through the mount and possibly damage the body of the vehicle.
3. Duplicate the original shock component stacking and orientation as pictured. Always note the stacking order of all shock components during disassembly. This will allow proper noted assembly of the shock, washers, bump stop, shock mount, gasket, and nut.
4. DO NOT install shock assembly with concave washer plates removed from the bottom or top of the shock mount. This will render your BMW unsafe and unfit to drive.