Types of German Audi Oil Specs

Since the mid-1990s there are approximately 14 different engine oil quality specifications for Audi and VW models. Each Audi oil quality specification signifies the necessary oil performance levels, chemicals, and properties in accordance with a desired Audi engine application. A high majority of Audi engines that experience mechanical issues or failures are due to prolonged use of lower to mid-quality engine oils. Using the correct Audi oil specification as outlined by Audi for your engine type will offer the best possible engine protection, performance, and longevity. Below you will find a brief overview and explanation of the Audi engine oil specifications and what the basic engine application should be. Always consult your service manual and confirm the specific fluid and oil requirements for your application.

DISCLAIMER: The Audi motor oil information on this page should not be used as a substitute for what your vehicle owner's manual, factory service manual, or authorized Porsche dealer recommends. Consult your owner's manual for the correct type of Audi oil that is to be used for your specific Audi model. The Audi oil specifications referenced in the article are used internationally. However, the Audi engine and year applications referenced here apply only to Audi models available in the USA.

Recommended Audi Oil Specifications

Audi VW 500 00 Oil Spec

Audi VW 500 00 oil spec was introduced and used for Audi gasoline and diesel engines built before late 1999. This spec was typically always formulated as conventional or semi-synthetic engine oil. The VW 500 00 oil specification is an old and no longer relevant oil specification for Audi engine applications. The VW 500 00 oil specification has been replaced by the new VW 502 00 / 505 00 oil specifications. Individuals desiring VW 500 00 oil specification quality standards should use engine oil with VW 502 00 / 505 00 oil quality specifications for higher engine oil performance.

Audi VW 501 01 Oil Spec

Audi VW 501 01 oil specification was designed for both Audi gasoline and diesel engines built before late 1999. The VW 501 01 oil specification is an old spec and has been replaced by the newer VW 502 00 / 505 00 oil specification. Wherever the older VW 501 01 oil specification is being requested it is recommended to use the VW 502 00 / 505 00 oil specification for improved engine oil performance results.

Audi VW 502 00 Oil Spec

Audi VW 502 00 oil specification is the most widely used engine oil specification used in America by Audi for all gasoline engines from the 1990s up to 2017/2018. Recommended for Audi gasoline engines subject to strenuous conditions. OEM-approved VW 502 00 oil specification engine oils are compatible with the Audi fixed oil change intervals of 10,000 miles or once a year. Whichever would occur first. Also, the VW 502 00 oil specification replaces the older VW 500 00 and VW 501 01 oil specification. Some 2017 and newer gasoline Audi engines such as the 2.0L TFSI and 1.4L TFSI, 2.9L TFSI, and 3.0L TFSI with Budack B-cycle valvetrain specify a newer oil specification. If you are a 2017 and newer Audi owner, please consult your service manual to confirm you're using the correct Audi engine oil specification.

VW 502 00 specification engine oil cross references to OEM part numbers G 052 502 M2, G 052 502 M4, G 052 502 M6, and G 052 502 M9.

RAVENOL HPS 5W-30
Meets VW 502 00 oil Type Specification.
ACEA A3 / B3 / B4

• Performance low friction semi-synthetic based oil with exclusive CleanCynto technology additive formula.
• Excellent corrosion protection, cold start characteristics, and flow.
• Fuel economy benefits and optional for all operating conditions.
• An excellent option for those who prefer more frequent oil change intervals.

RAVENOL VMO 5W-40
Meets VW 502 00 oil Type Specification.
ACEA C3

• High-performance synthetic base oil and exclusive CleanCynto technology additive formula.
• Optimal engine cleanliness and shear stability based on VW 502 00 spec accompanied by VW 505 01 spec.
• Better TSI and TFSI injection system protection and minimized valve deposits.
• Suitable for extended oil change intervals where recommended by the manufacturer.

EUROL Fluence 5W-40
Meets VW 502 00 oil Type Specification.

• Fully synthetic oil developed for excellent shear load stability during the entire extended oil change interval.
• Optimal engine cleanliness and shear stability based on VW 502 00 spec accompanied by VW 505 01 and VW 511 00 specs.
• Better TSI and TFSI injection system protection and minimized valve deposits.
• Formulation properties reduce friction, wear, and significantly improve fuel mileage.

EUROL Syndura 5W-40
Meets VW 502 00 Oil Specification

• Eurol fully synthetic engine oils are the preferred choice of today's demanding Dakar rally-winning teams.
• Fully synthetic oil technology provides excellent high-temperature shear load stability and film strength.
• Excellent quick lubricating film strength during cold engine starts and the warm-up phase.
• Minimal oil-related deposit buildup in combustion chambers, piston rings, & valves.

RAVENOL VST 5W-40
OEM Approved VW 502 00 Oil Specification

• Fully synthetic PAO-based oil with exclusive USVO and CleanCynto technology.
• No shear losses during an entire change interval.
• Extended oil change intervals where recommended by the manufacturer.
• High abrasion resistance, oxidation stability, and excellent cold start characteristics.
• Utilizes the positive properties of tungsten to smooth the internal surface structure of the engine.

RAVENOL SSL 0W-40
OEM Approved VW 502 00 Oil Specification

• Fully synthetic PAO-based oil with exclusive USVO and CleanCynto technology.
• No shear losses during an entire change interval.
• Extended oil change intervals where recommended by the manufacturer.
• Improved mechanical efficiency and fuel economy with excellent cold start characteristics.
• Utilizes the positive properties of tungsten to smooth the internal surface structure of the engine.

Audi VW 503 00 Oil Spec

Audi VW 503 00 oil specification was for gasoline engines with extended service intervals (15,000-30,000 miles or every two years. Whichever occurs first.). This extended service interval engine oil was also known by Audi as a Longlife II engine oil. This oil specification has been discontinued and replaced by the VW 504 00 oil specification. VW 502 00 oil specification can also be used in place of VW 503 00 oil specification but should not exceed 10,000 miles or once a year oil change interval. Whichever occurs first.)

VW 503 00 oil specification cross references to OEM part numbers G 052 183 M2, G 052 183 M4, G 052 183 M6, and G 052 183 M9.

Audi VW 503 01 Oil Spec

Audi VW 503 01 engine oil specification is for turbocharged gasoline engines over 180hp with extended service intervals (15,000-30,000 miles or every two years. Whichever occurs first.). This was more specifically designed for the Audi 2.7T biturbo engines, 225hp Audi TT models, and the W12 engines available in the Audi A8 and VW Phaeton. The VW 503 01 oil specification has been discontinued and replaced by the VW 502 00 or VW 504 00 oil specification depending on the engine application.

Audi VW 504 00 Oil Spec

Audi VW 504 00 oil specification is for Audi gasoline engines with extended or long life service intervals (Confirm intervals with the vehicle manufacturer). The VW 504 00 oil specification is also known by Audi as a Longlife III engine oil. VW 504 00 oil specification replaces the VW 503 00 and VW 503.01 oil specifications. Due to the purity in the VW 504 00 oil quality standard level, it is the desired oil specification by many to minimize the popular carbine buildup often associated with the modern valvetrain of the Audi TSI or TFSI gasoline engines. Some 2017 and newer gasoline Audi engines such as the 2.0L TFSI, and 3.0L TFSI with Budack B-cycle valvetrain specify a newer oil specification. If you are a 2017 and newer Audi owner, please consult your service manual to confirm you're using the correct Audi/VW engine oil specification.

VW 504 00 specification engine oil cross references to OEM part numbers G V52 195 A1, G V52 195 M1, G 052 195 M2, G 052 195 M4, G 052 195 M6, and G 052 195 M9.

EUROL Syntence FS 0W-30
OEM Approved VW 504 00 Oil Specification

• Eurol OPT additive technology, containing less phosphorus, sulphur, and sulphated ash.
• Fully synthetic oil developed especially for VW 504 00 SAE 0W30 oil specification engines.
• Designed for use on vehicles equipped with modern gasoline particulate filters and modern TSI FSI fuel systems.
• Quieter engine valve train components are typically noticed.

EUROL Syntence 5W-30
OEM Approved VW 504 00 Oil Specification

• Eurol fully synthetic engine oils are the prefered choice of today's demanding Dakar rally-winning teams.
• Fully synthetic oil developed especially for VW 504 00 oil specification engines.
• Designed for use on vehicles equipped with modern gasoline particulate filters and modern TSI FSI fuel systems.
• Quieter engine valve train components are typically noticed.

RAVENOL SMP 5W-30
OEM Approved VW 504 00 Oil Type Specification
ACEA C3

• Synthetic base oil with exclusive CleanCynto technology additive formula.
• Suitable for extended oil change intervals where recommended by the manufacturer.
• Excellent cold start characteristics, minimize friction wear, great shear stability, and fuel economy improvement.
• Supports diesel EGR and particulate filter emission system cleanliness and longevity.

RAVENOL VMP 5W-30
OEM Approved VW 504 00 Oil Type Specification
ACEA C3

• Fully synthetic PAO-based oil with exclusive USVO and CleanCynto technology.
• No shear losses during an entire change interval.
• Extended oil change intervals where recommended by the manufacturer.
• Improved fuel economy, reduces emissions, and excellent cold start lubrication.
• Increase DPF and TWC exhaust filter life expectancy.

Audi VW 505 00 Oil Spec

Audi VW 505 00 oil spec is formulated for older Audi diesel engines. This is the recommended oil specification for all non-Pumpe Duse TDI diesel engines prior to 2004. This is a full ash of full saps oil due to this era of the engine only being equipped with a catalytic converter and not yet a Diesel Particulate Filter (DPF) exhaust system.

VW 505 00 specification engine oil cross references to OEM part numbers G 052 502 M2, G 052 502 M4, G 052 502 M6, and G 052 502 M9.

Audi VW 505 01 Oil Spec

Audi VW 505 01 oil specification was introduced around 2000. The desired oil viscosity for an OEM-approved VW 505 01 oil specification is SAE 5W-40. However, depending on your region some oil manufacturers do make SAE 5W-30 and 10W-40 VW 505 01 oils that are OEM approved. The VW 505 01 oil spec was specifically designed for Audi TDI diesel engines equipped with Pumpe Duse TDI injection systems. However, due to Audi not importing any Pumpe Duse TDI injected diesel engines into America this oil specification is not active for Audi models in America. The Pumpe Duse TDI injection system is run directly off the camshaft lobs second to the camshaft lobs running the intake and exhaust valves. As the camshaft rotates, the rocker arm of the camshaft loads the injectors allowing them to be opened and closed to fire the diesel fuel into the cylinder. This creates more load on the camshaft when compared to a standard or conventional valvetrain engine. Due to this extra load, the Pumpe Duse TDI valve train requires a higher quality engine oil. Most Pumpe Duse TDI camshaft and injector failures are due to improper, low quality, or engine oils that claim VW 505 01 oil quality levels but do not. For all practical purposes, a Pumpe Duse Audi TDI diesel engine should make it to over 200,000 miles with no injector or camshaft issues if a high-quality OEM-approved VW 505 01 oil specification is used along with the factory recommended oil change intervals.

VW 505 01 oil specification cross references to OEM part numbers G 052 167 1L, G 052 167 A2, G 052 167 M2, G 052 167 M4, G 052 167 M6, G 052 167 M9, GE521672QDSP, GE521671QDSP, ZVW352540S, ZVW352540SDSP

RAVENOL VMO 5W-40
OEM Approved VW 505 01 Oil Type Specification
ACEA C3

• High-performance synthetic base oil and exclusive CleanCynto technology additive formula.
• Special MID SAPS low ash oil characteristics.
• Suitable for extended oil change intervals where recommended by the manufacturer.
• Meets stringent EURO IV and EURO V emission standards.
• Noticeable fuel economy improvement.

EUROL Fluence 5W-40
Meets VW 505 01 oil Type Specification.

• Fully synthetic oil developed for excellent shear load stability during the entire extended oil change interval.
• Optimal engine cleanliness and shear stability based on VW 505 01 and VW 511 00 specifications.
• Meets stringent EURO IV and EURO V emission standards.
• Formulation properties reduce friction, and wear, and significantly improve fuel mileage.

Audi VW 506 00 Oil spec

Audi VW 506 00 oil specification was recommended for TDI diesel engines in accordance with extended service intervals (15,000-30,000 miles or every two years. Whichever occurs first.). This extended service interval engine oil was also known by Audi/VW as a Longlife II engine oil. This is an old oil specification and has been replaced by the VW 507 00 oil specification.

VW 506 00 oil specification cross references to OEM part numbers G 052 183 M2, G 052 183 M4, G 052 183 M6, and G 052 183 M9.

Audi VW 506 01 Oil Spec

Audi VW 506 01 oil spec was specifically designed for VW TDI diesel engines equipped with Pumpe Duse TDI injection systems requiring extended service interval engine oil (15,000-30,000 miles or every two years. Whichever occurs first.). This extended service interval engine oil was also known by Audi/VW as a Longlife II engine oil. The VW 506 01 oil specification has been discontinued and replaced by the VW 505 01 or VW 507 00 oil specs depending on the engine application.

If the TDI diesel vehicle that was requiring the VW 506 01 oil spec is without a Diesel Particulate Filter (DPF) exhaust system, the VW 505 01 oil is recommended. If the TDI diesel engine is equipped with a Diesel Particulate Filter (DPF) exhaust system, then a VW 507 00 oil spec should be used.

VW 506 01 oil specification cross references to OEM part numbers G 052 183 M2, G 052 183 M4, G 052 183 M6, and G 052 183 M9.

Audi VW 507 00 Oil Spec

Audi VW 507 00 oil specification is low ash or low saps engine oil specifically designed and formulated for Audi TDI diesel engines equipped with Diesel Particulate Filter (DPF) exhaust systems (EURO VI, EURO V, and EURO IV standard emission engines). The VW 507 00 oil specification is also known by Audi/VW as a Longlife III engine oil. This means it is stable to 15,000-30,000 miles or every two years. Whichever occurs first. Always confirm your oil change intervals with the vehicle manufacturer's recommendations in your region. The VW 507 00 engine oil formulation allows excellent engine lubrication while also providing the best longevity to the Diesel Particulate Filter and Exhaust Gas Recirculation (EGR) system. If an engine oil without the VW 507 00 oil specification is used for extensive periods this can clog the Diesel Particulate Filter and EGR emission system. This can result in excessive engine exhaust temperatures. Damaging the turbocharger and engine internals. The long-term result of using the wrong engine oil could be catastrophic engine damage.

The VW 507 00 oil specification was specifically used in America in the following VW engines.

• 2009-2015 Audi 2.0L TDI diesel engines
• 2009-2016 Audi 3.0L TDI diesel engines

The VW 507 00 is designed for extended service intervals. The factory recommended oil change interval for all engines in America requiring the VW 507 00 engine oil quality specification have a 10,000-mile oil change interval or once-a-year service. Whichever occurs first. If the engine oil is not OEM approved for the VW 507 00 oil specification under no circumstances should you try to attain a 10,000 mile or once-a-year oil change interval.

VW 507 00 specification engine oil cross references to OEM part numbers G V52 195 A1, G V52 195 M1, G 052 195 M2, G 052 195 M4, G 052 195 M6, and G 052 195 M9.

EUROL Syntence FS 0W-30
OEM Approved VW 507 00 Oil Specification

• Eurol OPT additive technology, containing less phosphorus, sulphur, and sulphated ash.
• Energy conserving through improved fuel mileage, reducing engine emissions, and extended oil change intervals of up to 18,000 - 30,000 miles (30,000 or 50,000 km). Follow the manufacturer's recommendations.
• Excellent high-temperature shear load stability and film strength during the entire extended oil change interval to minimize wear.

EUROL Syntence 5W-30
OEM Approved VW 507 00 Oil Specification

• Eurol fully synthetic engine oils use proven Dakar rally-winning formulations.
• Energy conserving through improved fuel mileage, reducing engine emissions, and extended oil change intervals of up to 18,000 - 30,000 miles (30,000 or 50,000 km). Follow the manufacturer'