Ravenol Brake Fluid DOT 5.1 - 1L
1 Liter Bottle - German made DOT 5.1 brake fluid. Designed for the demanding braking and ABS systems of European, Domestic, and Asian applications that call for DOT 5.1 brake fluid spec. The specific formulation of RAVENOL DOT 5.1 offers international DOT 5.1 specifications SAE J 1704, ISO 4925 and fulfills FMVSS 116 DOT 5.1. See your owner service manual to confirm.
Fabrication: Synthetic Brake Fluid
RAVENOL DOT 5.1 brake fluid is suitable for use in all vehicles with ABS properties. The fluid is chemically stable and contains additives that provide the highest lubricating power.
The specific formulation of RAVENOL DOT 5.1 offers international DOT 5.1 specifications SAE J 1704, ISO 4925 and fulfills FMVSS 116 DOT 5.1.
RAVENOL DOT 5.1 fluid is an ideal brake fluid for modern vehicles with the brake circuit accompanying systems such as ESP and ABS due to its low viscosity. The safety potential of the aggregates is enhanced by the excellent properties of RAVENOL DOT 5.1 even at low temperatures.
RAVENOL DOT 5.1 brake fluid can be used in all vehicles where DOT 5.1 specification is required. It is suitable for all hydraulic brake systems with synthetic fluid. RAVENOL DOT 5.1 brake fluid is miscible with all known brake fluids of the same specification.
To use the high performance level of RAVENOL DOT 5.1, a complete change of the brake fluid is recommended.
RAVENOL DOT 5.1 is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).
FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID
KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.
STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER.
KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER.
CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.
Dispose of used brake fluid responsibly (EU waste code 160113).
Brake fluid damages paint work –if spilt wash off immediately with plenty of water.
RAVENOL DOT 5.1 is tried and tested for aggregates specifying:
Specifications: ISO 4925 Class 5.1, FMVSS 116 DOT 5.1, SAE J 1704
RAVENOL DOT 5.1 offers:
- Optimal ABS properties.
- Chemical stability.
- High lubricating power.
- Neutral behavior towards brake parts.
- Low viscosity at low temperatures.
- Miscibility with all brake fluids of the same specification.
To the best of our knowledge all information reflects the current state of findings and our development. Subject to change. Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems occur please consult a technician.
Always consult your service manual and confirm the specific fluid and oil requirements for your application. Blauparts and Ravenol are not affiliated with Volkswagen of America (VwoA), Volkswagen AG, Audi of America, Audi AG or any other vehicle manufacture. All trademarks and OE specification part numbers referenced in this product listing are displayed for identification purposes only and are in no way intended to denote any affiliation with their corresponding owners.
WARNING: California Proposition 65
Note: We recommend flushing the brake fluid system about every 30,000-40,000 miles or 3-4 years. Changing brake fluid is recommended and easiest when performing your brake rotor or pad service.
Note: Changing your brake fluid more frequently can help minimize long term brake and clutch system maintenance costs. When the brake fluid system and clutch fluid circuit are properly maintained with clean brake fluid this allows for minimal contamination such as dirt's and moisture which can give opportunity for seal failures, rust and corrosion, and piston scarring within the brake fluid and clutch fluid circuit system. Dirty brake fluid in the long term can lead to problematic caliper pistons, brake master cylinders, clutch master cylinders, and clutch slave cylinders.
|MFG Part Numbers||1350602-001-01-000|
|Item Returns||This item can be returned|