Eurol Ultrance Blue Fully Synthetic 0W20 Motor Oil 1L
Fully synthetic 0W-20 motor oil meets exceeds GM dexos D and Mercedes MB 229.71 oil specifications. Ford WSS-M2C952-A1 approval and Jaguar Land Rover STJLR.03.5006 approval required for modern engines. Also suitable for use where Ford WSS-M2C947-A, WSS-M2C947-B1, and WSS-M2C962-A1 are specified. Eurol Ultrance Blue 0W-20 can be used in various vehicles that call for SAE 0W-20 ACEA C6, ACEA C5, or API SP oil. Eurol Ultrance Blue 0W-20 is suitable for not only gas and diesel-fueled engines, but also alternative fuel-type engines such as LPG, CNG, biodiesel (B10), ethanol (E85), and hybrid. This fully synthetic high-performance motor oil is engineered to reduce Low-Speed Pre-Ignition (LSPI) events and prevent oil-related deposits in turbocharged engines. A specialty fuel-efficient engine oil manufactured in Holland, Netherlands, with over 40 years of premium lubrication expertise. See your owner service manual to confirm required oil type.
Eurol Ultrance Blue 0W-20 is a premium fuel-economy engine oil for modern passenger cars, vans, and SUVs equipped with aftertreatment devices with or without turbochargers. Eurol Ultrance Blue 0W-20 is specially developed for Ford EcoBlue diesel engines where Ford WSS-M2C952-A1 is prescribed. It can also be used for Opel, Mercedes-Benz, or GM vehicles requiring the specifications OV0401547, MB 229.71, or dexos D.
Eurol Ultrance Blue 0W-20 is a low-viscosity engine oil, that contributes to fuel efficiency without compromising wear protection, even under high temperatures during extended drain intervals. This engine oil is not only suitable for gasoline (also (T)GDI) or diesel-fueled engines, but also for alternative fuels such as LPG, CNG, biodiesel (B10), and ethanol (E85), as well as for hybrid engines.
Eurol Ultrance Blue 0W-20 has been formulated to reduce Low-Speed Pre-Ignition (LSPI) events to a minimum in modern engines. The cleaning properties of the oil prevent deposits in the engine and turbo during the life of the oil.
Eurol Ultrance Blue 0W-20 has a shear-stable formulation with low evaporation and good cold-start ability. This engine oil can be recommended for many American, Asian, and European cars meeting Euro 6 requirements and CO2 restrictions.
Drain intervals should be reduced significantly for certain severe applications, such as very often stop-and-go or extreme heavy loads, as mentioned in some manuals. Eurol Ultrance Blue 0W-20 is also recommended for the engines requiring Ford WSS-M2C947-A/B1 and Ford WSS-M2C962-A1 performance. It is backward compatible with previous API specifications such as API SN Plus, SN, and ILSAC GF-5. If the quality needed for a specific vehicle is not mentioned under the specification mentioned below, check your vehicle’s owner’s manual or the Eurol Product Advisor at www.eurol.com for further applicability of this oil.
Approved
- Ford WSS-M2C952-A1
- API SP
- Jaguar Land Rover STJLR.03.5006
Performance level
- ACEA C6
- ACEA C5
- MB 229.71
- GM Dexos D
- OV 040 1547 - A20
Always consult your service manual to confirm the specific fluid and oil requirements for your exact vehicle application. Always follow the vehicle manufacturer's recommended oil change intervals. This product description, claims, and specifications are approximate values and are subject to change due to manufacturer fluctuations. Blau, Blauparts, and Eurol are not affiliated with any vehicle or vehicle part manufacturer, its affiliated companies, subsidiaries, or its licensors. All trademarks and OE specification part numbers referenced in this product listing are displayed for identification purposes only and are in no way intended to denote any affiliation with their corresponding owners.
WARNING: California Proposition 65
Brand | Eurol |
---|---|
MFG Part Numbers | E100165-1L |
Oil Type | Fully Synthetic |
Vehicle Type | Car, Light Truck, & Van |
Refund period | 30 days |
Store Credit period | 90 days |