BMW Rear Shock Mount - 3 Series E46 E39
SERVICE BULLETIN: BMW 3 Series Rear Shock Mount
Download PDF - The Proper Stacking Order and Placement of Rear BMW 3 Series Shock Mount Concave Washers.
SHARE ARTICLE
BMW Shock Mounts_Blauparts BMW 3 series shock mount_Blauparts

The Proper Stacking Order and Placement of Rear BMW 3 Series Shock Mount Concave Washers.

August 28, 2013

Subject: Proper rear shock assembly stacking order and proper placement of shock mount concave washers.
Application: 1998-2006 BMW 3 Series E46 Chassis
Part Number: 33 52 1 092 362, MGR1501, MG21951, MG26011
Release Date: 8/28/2013

1. During shock and shock mount replacement always reuse the concave washer plates under the shock mount and on top of the shock mount in proper orientation as pictured.

2. If no concave washers are used during shock assembly, this could cause the shock to push through the mount and possibly damage the body of the vehicle.

3. Duplicate the original shock component stacking and orientation as pictured. Always note the stacking order of all shock components during disassembly. This will allow proper noted assembly of the shock, washers, bump stop, shock mount, gasket, and nut.

4. DO NOT install shock assembly with concave washer plates removed from the bottom or top of shock mount. This will render your BMW unsafe and unfit to drive.

Website: www.blauparts.com
Phone: (920) 758-3232
Fax: (920) 758-3234
Email: customerservice@blauparts.com
Hours: Mon-Fri 9:00AM to 5:00PM CST
Copyright BLAUfergnugen! Inc. 2013