Most 1996 - on Audi models have a sophisticated multi-link front control arm suspension. The Audi S6 struts are mounted onto the control arm and the integral Audi S6 control arm ball joint is at an upside down installation position.
The weight of an Audi S6 chassis rests on the upper side of the control arm ball joint. Such significant dynamic loads can lead to eventual failure of the control arm bushings hydro filling. Too, due to the force of gravity, the lubricant in the control arm ball joint flows from the upper side downwards into the sealing ring. This loss of lubrication leads to wear and eventual failure of the integral Audi S6 control arm ball joint. Audi S6 owners become aware of this by the front suspension squeaking noise when braking.
 Ocap control arm kits are a great replacement option. Ocap of Italy has improved Audi S6 control arms. The materials used in these improved Ocap Audi S6 control arms prove to be a long-term solution for Audi S6 control arm problems. The control arm bushing material is composed of an updated resilient material for improved steering input, handling and durability. Ocap control arm kits also include improved control arm rubber dust boots, made of a high quality material which prevents cracking and exposure of the ball joint as well as better moly grease for less wear and more miles.
Ocap is a renowned high quality Italian company that specializes specifically in the area of steering and suspension parts. We've used these Ocap kits in our own service facility and have had great results. Not much is know about Ocap in the Audi S6 Vw realm because their replacement suspension parts are used more on Mercedes, Volvo, and BMW models. However, they are the OEM supplier for Maserati and Lamborghini. They are a TÜV and ISO 9001 certified company. This is one of the most important certifying bodies in Europe. Ocap has also achieved two more important ISO 14001 and ISO/TS 16949 quality certifications. We encourage you to check out their site for more information. www.ocap.it
| Improved Ocap Audi S6 Control arm Kit Includes The Following: |
• Qty2 4B3 407 151D Audi S6 Control Arm - Lower DS & PS
• Qty1 8E0 407 693Q Audi S6 Control Arm - Lower Rear DS
• Qty1 8E0 407 694Q Audi S6 Control Arm - Lower Rear PS
• Qty1 8E0 407 505A Audi S6 Control Arm - Upper DS
• Qty1 8E0 407 506A Audi S6 Control Arm - Upper PS
• Qty1 8E0 407 509A Audi S6 Control Arm - Upper Rear DS
• Qty1 8E0 407 510A Audi S6 Control Arm - Upper Rear PS
• Qty1 8D0 411 317D Audi S6 Sway Bar Link - DS
• Qty1 8D0 411 318D Audi S6 Sway Bar Link - PS
• Qty2 4F0 419 811C Audi S6 Sway Bar Link - DS
• Plus All Necessary Installation Hardware
|
| DO YOU HAVE A DIFFERENT PART NUMBER? |
|
|
Do you have a loose Audi S6 control arm, ball joint, or suspension rattle? Does your Audi S6 front suspension clunk every time you hit a pothole? You may need to replace your Audi S6 control arms and control arm bushings. Replacing Audi S6 control arms one by one can cost a lot of money. You'll save big on installation costs when replacing all of your Audi S6 control arms at once. If some of the control arms are on their way out, the others aren't far behind. You're better off getting the job done right the first time.
Save hundreds of dollars by replacing all of your Audi S6 control arms, tie rod ends, sway bar links, and hardware with our convenient updated kit! In the event of an Audi S6 control arm failure, look to the nation's leading Audi S6 control arm specialist for the solution!
Are you unsure how to install Audi control arms or bushing, curious how long it takes to replace them, or wondering if any special tools are required for control arm replacement; then check out the following:
|
|
|
